WFWG 3.11: How to Create a Boot Disk to Load Real-Mode Network

MORE INFORMATION

1. Create a bootable floppy disk.
   
   NOTE: If you are using MS-DOS 6.x and you are not using DoubleSpace, you can delete the DBLSPACE.BIN file from the floppy disk to create more disk space.
2. Run an administrative installation (SETUP /A) of Windows for Workgroups 3.11 to a C:\WINSHARE directory. This machine will be referred to as the server machine.
3. From the C:\WINSHARE directory, run a shared network installation (SETUP /N) to the server's hard disk drive (for example C:\KBNETWORK). Use the Custom Setup option to perform the following steps:
   
   
   1. Clear the Set Up Printers and "Set Up Applications Already on Hard Disk(s)" check boxes.
   2. Select None for the Swapfile setting.
   NOTE: To create a second floppy disk for a different type of network adapter card, simply repeat step 3 but choose a different directory name when you run SETUP /N. Ensure that the appropriate network adapter card and its settings are detected during Setup.
4. Delete the following files from the C:\directory to free additional disk space for the floppy disk:

   *.CLN
   *.WIN
   BOOTLOG.TXT
   EMM386.EXE
   MOUSE.INI
   MSCDEX.EXE
   NCDINFO.INI
   SPART.PAR

5. Copy the contents of the C:\directory to the root of the floppy disk you formatted in step 1.
6. Create an AUTOEXEC.BAT file and a CONFIG.SYS file on the floppy disk with at least the following entries:

          CONFIG.SYS
          ==========
   
          Files=30
          Buffers=20
          Lastdrive=z
          Device=A:\HIMEM.SYS
          Device=A:\IFSHLP.SYS
          Device=A:\RAMDRIVE.SYS 1024 512 512 /E
          <Third-party disk partitioner>
          <Third-party disk-compression driver>
          <Other necessary third-party driver>
   						

   NOTE: If the workstation has a hard disk drive, the Device=A:\RAMDRIVE.SYS is not necessary and can be removed from the CONFIG.SYS file.

          AUTOEXEC.BAT
          ============
   
          A:\SMARTDRV A+
          Path=a:\;w:
          A:\NET LOGON UserName Password
          A:\NET USE W: <\\SERVER>\<ShareName> /p:No
          Set Temp=C:\ 
   						

   NOTE: <\\SERVER> is the name of the machine that contains the Setup /A (C:\WINSHARE) copy of Windows for Workgroups. <\\ShareName> is the name given to the C:\WINSHARE directory when it is shared. (See step 9 for more information.)
7. Edit the SYSTEM.INI file on the floppy disk and set the DEVDIR entry in the [Network Drivers] section to equal A:\.
8. Edit the SYSTEM.INI file in the C:\directory and delete the AutoStart=FULL line from the [Network] section.
9. Reboot the server machine and run Windows from the hard disk drive. Share the C:\WINSHARE directory from File Manager.
10. Boot a workstation with the floppy disk you created.
    
    NOTE: The first time you use this floppy disk, you must reenter the password you entered in the logon line in the AUTOEXEC.BAT file.
11. At the A:\ prompt, change to the W: drive and install Windows for Workgroups to this workstation's hard disk drive, or just run Windows from the floppy disk by typing win.