What to Do When You Have a Damaged FoxPro Disk

MORE INFORMATION

Common Error Messages

You may receive one of the following error messages during Setup:

• Please insert disk: <diskname> -or-
  
  
• The file "<filename>" appears to be missing from the installation disk. You may either continue installation with the remaining files, or stop Setup.

Start the Macintosh Without INITs and CDEVs

NOTE: FoxPro for Macintosh requires Macintosh System 7 or later.

Complete the following steps to start the Macintosh without loading system extensions (INITs) or Control Panel devices (CDEVs):

1. Restart the Macintosh.
2. Hold down the SHIFT key while the computer reboots and until the message "Welcome to Macintosh. Extensions Off." is displayed.
   
   NOTE: Some computer configurations require certain INITs or CDEVs to function properly. These include systems that use third-party hardware, such as monitors, accelerators, network cards, and so forth. Some password-protection programs require INITs to decrypt the boot sector of the hard disk and to allow startup.
   
   CAUTION: PREPARE A BOOTABLE FLOPPY DISK FOR YOUR PARTICULAR HARDWARE CONFIGURATION BEFORE ALTERING THE SYSTEM FOLDER ON YOUR HARD DISK.
3. Run the FoxPro Setup program again.

Rebuild the Desktop on the FoxPro Floppy Disk

1. Verify that the FoxPro disk is not locked (that the sliding tab is shut).
2. While holding down the COMMAND and OPTION keys, insert the FoxPro disk into the floppy disk drive.
3. When you are prompted to rebuild the Desktop file, choose OK.
4. Run the FoxPro Setup program again.

Other Troubleshooting Suggestions

If the procedures listed above do not solve your problem, try the following:

• Install FoxPro on a different Macintosh.
  
  If the FoxPro disks work on another Macintosh, the problem may be with your floppy disk drive.
• Copy the contents of the floppy disk to the hard disk.
  
  If the floppy disk does not successfully copy to the hard disk, try copying a different floppy disk (one not included with FoxPro) to the hard disk. If that floppy disk copies to the hard disk successfully, it is likely that the FoxPro floppy disk is damaged.