Knowledge Base

Digicom Connection 14.4+Fax Modem Does Not Work in Windows NT

Article ID: 114724

Article Last Modified on 10/31/2006

APPLIES TO

This article was previously published under Q114724

SUMMARY

The Digicom Connection 14.4+Fax modem does not work in Windows NT. The Connection 14.4+Fax is totally software-configurable and requires MS-DOS- based drivers to initialize it. Because the software attempts to download configuration information directly to the RAM on the modem, these drivers fail to load under Windows NT.

Currently, the only options are:

  • Start MS-DOS and load the drivers to initialize the modem. Then start Windows NT. The modem will now be operational until the computer is turned off. Repeat this procedure each time you turn your computer on after you shut it down. -or-

  • Use another modem that is not totally software-configurable.

MORE INFORMATION

Digicom supplies Smart Modem software for the Connection 14.4+Fax modem. It generally puts a SMODEM directory in the path and you will have one of the following which initializes the modem.

  • A SMLOAD.EXE line in the AUTOEXEC.BAT. -or-

  • DL <FILENAME>.DSI in the AUTOEXEC.BAT or other batch file. -or-

  • A Smart Modem Manager which loads in Windows and a replacement for the Windows 3.x communication driver COMM.DRV.
For additional information, contact Digicom technical support at (408) 262-1277.

The Connection 14.4+Fax modem is manufactured by Digicom, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Additional query words: prodnt fax terminal procomm

Keywords: kbhardware KB114724


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.