KB116254 - System File Changes Installing Xircom CE10 Ethernet Adapter

MORE INFORMATION

AUTOEXEC.BAT

C:\WINDOWS DIRECTORY\NET START

CONFIG.SYS

Device=C:\WINDOWS DIRECTORY\IFSHLP.SYS

SYSTEM.INI

[BOOT]
network.drv=WFWNET.DRV

[BOOT.DESCRIPTION]
network.drv=Microsoft Windows Network (version 3.11)

[386ENH]
network=*vnetbios, *vwc, vnetsup.386, vredir.386, vserver.386
netheapsize=20
netmisc=ndis.386, ndis2sup.386
transport=nwlink.386, nwnblink.386, netbeui.386
InDOSPolling=FALSE

[NETWORK]
winnet=wfwnet/00025100
Username=username
Workgroup=workgroup
ComputerName=computername

[NETWORK DRIVERS]
devdir=C:\windows directory
LoadRMDrivers=YES
netcard=cendis.exe
transport=ndishlp.sys,*netbeui

[NWBLINK]
lanabase=1

PROTOCOL.INI File

[NETWORK SETUP]
version=0x3110
netcard=cendis,1,CENDIS,1
transport=ms$nwlinknb,NWLINK
transport=ms$ndishlp,MSNDISHLP
transport=ms$netbeui,NETBEUI
lana0=cendis,1,ms$netbeui
lana1=cendis,1,ms$nwlinknb
lana2=cendis,1,ms$ndishlp

[PROTMAN]
Drivername=Protman$
Priority=MS$NDISHLP

[CENDIS]
Drivername=XIRCOM$
INT=10 (or other IRQ adapter configured for)
IOADDRESS=0x300 (or other address configured for)
MEM=0xC800 (or other starting memory address configured for)
IOWORDSIZE=16
SOCKET=1 (socket that lan adapter installed in)

[NWLINK]
Bindings=CENDIS

[MS$NDISHLP]
Drivername=ndishlp$
BINDINGS=CENDIS

[NETBEUI]
Drivername=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=CENDIS
Lanabase=0

PROTOCOL.INI

Setup also creates a PROTOCOL.INI file when you install the Xircom adapter.(If PROTOCOL.INI already exists, Setup modifies it.) Sometimes the PROTOCOL.INI settings do not match the CONFIG.SYS settings for the Credit Card adapter, which causes it to fail. If this happens, compare your PROTOCOL.INI settings with the relevant CONFIG.SYS lines and modify any inconsistent settings.