Hard Disk Access Disappears with Ultrastor 34F Local Bus
Article ID: 117139
Article Last Modified on 12/6/2003
APPLIES TO
- Microsoft MS-DOS 5.0 Standard Edition
- Microsoft MS-DOS 5.0a
- Microsoft MS-DOS 6.0 Standard Edition
- Microsoft MS-DOS 6.2 Standard Edition
- Microsoft MS-DOS 6.21 Standard Edition
This article was previously published under Q117139
SYMPTOMS
After you add the line DOS=UMB to the CONFIG.SYS file, only one MS-DOS
command can be executed before hard disk access is lost on a SCSI hard disk
drive controlled by a Ultrastor 34F local bus SCSI controller.
CAUSE
This behavior occurs if DOS=UMB appears in the CONFIG.SYS file before the
Ultrastor SCSI device driver, USPI14.SYS.
RESOLUTION
To correct this problem, edit the CONFIG.SYS file and add USPI14.SYS before
the line DOS=UMB.
If the USPI14.SYS file is not currently available, remark out the DOS=UMB
line in the CONFIG.SYS until the file can be loaded.
Additional query words: 5.00 5.00a 6.00 6.20
Keywords: KB117139