Incomplete or Incorrect Output from Printer Shared over Novell

Q117787

6.00 6.00a WINDOWS kbnetwork
The information in this article applies to:

SYMPTOMS

When you print from Word for Windows to a shared printer over a Novell network, the printout may contain "garbage" characters, any graphics in your document may print incompletely, or the document may fail to print. It may also drop characters.

You may be able to print successfully from other Windows-based applications such as Windows Write and Windows Paintbrush.


CAUSE

This problem may occur when your printer is connected to a network server using Novell NetWare if any of the following Novell printing options are set:

Form Feed
Enable Tabs
Enable Timeout
Enable Banner


WORKAROUND

Method 1: Use the Novell NetWare Printcon utility or Windows Control Panel (choose the Printers icon) to clear the Novell printing options listed above.

Method 2: (You must have supervisory rights or be a PrintServer Operator.) On the Novell Server, start PConsole, choose Print Server Information, choose the print server name, choose Print Server Configuration, choose Printer Configuration, choose the printer model, and increase the "Buffer Size in K" setting from 3K to 10K.


MORE INFORMATION

For more information on troubleshooting printing problems with Novell NetWare, query on the following words in the Microsoft Knowledge Base:

NetWare and debugging and windows and printing
The Novell products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.


REFERENCES

Windows for Workgroups, NETWORK.WRI file, page 10

Additional query words: 6.00a novell hp word6 winword laserjet postscript graphics pictures print-out

Keywords : kbprint
Issue type :
Technology :


Last Reviewed: November 8, 2000
© 2001 Microsoft Corporation. All rights reserved. Terms of Use.