Knowledge Base

Fatal Error Message with HP 35480A DAT Drive and DPT 2022 SCSI

Article ID: 120017

Article Last Modified on 10/31/2006

APPLIES TO

This article was previously published under Q120017

SYMPTOMS

An HP 35480A DAT tape backup with a DPT 2022 SCSI controller performs backups but generates this message when you try to restore or verify the backup:
Fatal Error on Drive 1
Another tape drive and controller may restore and verify the tape with no errors.

CAUSE

This is caused by an outdated firmware revision on the DPT 2022 controller.

(The HP 35480A rev 9.49 does not require a firmware update.)

RESOLUTION

Contact DPT or your hardware manufacturer for SMARTCOM BT-0002-002C5. Use it to replace SMARTCOM BT-0002-002B1. (The revision number is located on the single ROM chip in the corner of the adapter which is closest to the external SCSI connector and the EISA bus connector).

Additional query words: prodnt 3.10

Keywords: KB120017


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.