KB122051 - How Windows 95 Performs a Safe-Mode Start

Article ID: 122051

Article Last Modified on 11/15/2006

APPLIES TO

Microsoft Windows 95

This article was previously published under Q122051

SUMMARY

This article discusses how Windows 95 boots in Safe mode. A Safe-mode boot can be invoked in the following ways:

By pressing F5 at the "Starting Windows 95" message.
By pressing F8 at the "Starting Windows 95" message, and then choosing Safe Mode from the Windows 95 Startup menu.
Automatically, if Windows 95 did not start on the previous attempt.

MORE INFORMATION

How Windows 95 boots in Safe mode:

Windows 95 bypasses the portion of the Registry that loads protected- mode device drivers, and bypasses the Autoexec.bat and Config.sys files.

Himem.sys is loaded with the /testmem:on switch. No other command-line switches are processed. For additional information, please see the following article in the Microsoft Knowledge Base:
133442 Safe Mode Boot Does Not Process Machine Switch for Himem.sys
Ifshlp.sys is loaded. Dblbuff.sys is loaded with the /d+ switch.
Windows 95 obtains path information from the Msdos.sys file.
If Windows 95 files are found, the command "win /d:m" (which enables a Safe-mode boot) is executed and Command.com is skipped.

If Windows 95 files are not found, Command.com is executed.

When "win /d:m" is executed, Windows 95 looks for a System.cb file in the Windows folder. If this file is not present, a clean System.cb file is loaded from memory.

A clean System.cb file loads the following virtual device drivers (VxDs):

      mouse=*vmouse
      device=*configmg
      device=*vwin32
      device=*vfbackup
      device=*vshare
      device=*vcomm
      device=*ifsmgr
      device=*ios
      device=*vfat
      device=*vcache
      device=*vcond
      device=*int13
      device=*vxdldr
      device=*vdef
      device=*dynapage
      device=*reboot
      device=*vsd
      device=*parity
      device=*biosxlat
      device=*vmcpd
      device=*vkd
      device=*vdd
      device=*ebios
      device=*vtdapi
      device=*vmpoll
      woafont=dosapp.fon

After these VxDs are loaded, and just before Win.com loads the shell, the System.cb file is discarded and the original System.ini file is restored. If no System.ini file is found to restore, an empty System.ini file is created. The Winstart.bat file is not processed.
Windows 95 now uses the original registry settings and System.ini and Win.ini files.

This effectively bypasses the [Boot] and [386Enh] sections of the System.ini file and disables all the Windows 95 protected-mode devices listed in Device Manager. Also, Windows 95 does not run programs listed on the "Load=" and "Run=" lines in the [Windows] section of the Win.ini file.

Note that although the [Boot] section of the System.ini file is bypassed, the "shell=" and "drivers=" lines in the [Boot] section are processed.
The shell resizes the desktop to a resolution of 640 x 480.

Additional query words: w95susd

Keywords: kbenv kbinfo kbui KB122051