RAS Clients Select the Beginning Address in Static Pool
Article ID: 122701
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q122701
SYMPTOMS
If a DHCP server is not available or if you do not want DHCP to assign
remote TCP/IP client IP addresses, a range of IP addresses can be given to
a Remote Access Service (RAS) server for assignment to clients, which is
called the static address pool. After you select the "Allow remote clients
to request a predetermined IP address" option in the RAS Server TCP/IP
Configuration dialog box and the RAS client selects the beginning static
address as its IP address, the RAS client is unable to PING the remote
network including the RAS server.
CAUSE
This problem occurs when the RAS client requests the beginning IP address
in the static address pool. This address is reserved for the RAS server's
use and cannot be used by a RAS client.
WORKAROUND
To work around this problem, request another IP address in the static
address pool other than the beginning IP address in the pool.
STATUS
Microsoft has confirmed this to be a problem in Windows NT Workstation and
Server versions 3.5, 3.51, and 4.0. We are researching this problem and
will post new information here in the Microsoft Knowledge Base as it
becomes available.
Additional query words: point-to-point prodnt rasphone rasadmin
Keywords: kbnetwork KB122701