Knowledge Base

Windows NT 3.5 Does Not Support TI MicroLaser Pro 600 Printer

Article ID: 123818

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q123818

SUMMARY

Windows NT does not provide a printer driver for a TI MicroLaser Pro 600 printer. This printer is not supported by Windows NT at this time.

SYMPTOMS

When you print on a TI MicroLaser Pro 600 printer using the TI MicroLaser 600 printer driver, the first two lines print correctly, but the remainder of the print job is unreadable.

WORKAROUND

To work around this problem, use the Apple LaserWriter II series printer driver. For additional information, contact Texas Instruments Technical Support at (800) 848-3927.



The MicroLaser Pro 600 printer discussed here is manufactured by Texas Instruments, a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.

Additional query words: prodnt print

Keywords: KB123818


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.