Mitsumi Driver Does Not Support Sound Blaster 16 Multi-CD-ROM
Article ID: 123995
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q123995
SYMPTOMS
The Mitsumi CD-ROM driver supplied with Windows NT version 3.5 does not
support the Creative Labs Sound Blaster 16 Multi-CD-ROM board (CT2230).
CAUSE
The Mitsumi CD-ROM driver requires an I/O base address above 300H. The
CT2230 automatically configures the I/O base address below 300H by adding
10H to the audio settings. Valid audio settings for the Sound Blaster 16
board are 220H, 240H, 260H, or 280H. Therefore, the maximum I/O base
address that can be configured for the Mitsumi interface is 290H. This
address does not work with the Mitsumi CD-ROM driver.
The older version of the Sound Blaster Multi-CD-ROM board (CT1750) includes
additional jumpers to configure the Mitsumi interface separately and works
with the driver that is currently available.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.5.
We are researching this problem and will post new information here in the
Microsoft Knowledge Base as it becomes available.
Additional query words: sb16 prodnt mcd
Keywords: KB123995