Tape Backup Units Supported in Windows 95

MORE INFORMATION

The Windows 95 Backup program supports the following tape backup units:

• QIC 40, QIC 80, and QIC 3010 tape drives made by the following companies, and connected to the primary floppy disk controller:

        Colorado Memory Systems (CMS)
        Conner
        IOmega
        Wangtek (only in "hardware phantom mode" or "Drive B sharing mode")
  						

• CMS QIC 40, QIC 80, and QIC 3010 tape drives connected to a parallel port.

The following items are not compatible with Backup:

• Drives connected to a secondary floppy disk controller or to an accelerator card.
• Archive drives.
• Irwin AccuTrak tapes.
• Irwin drives.
• Mountain drives.
• QIC Wide tapes (Backup supports QIC Wide drives using QIC 80 tapes).
• QIC 3020 drives.
• SCSI tape drives.
• Summit drives.
• Tape drive controllers of any type.
• Travan drives.

Note that some floppy-controller-driven tape backup units require firmware revisions to work properly with the Windows 95 Backup program.