Application Setup Fails If No AUTOEXEC.BAT or CONFIG.SYS
Article ID: 125448
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q125448
SYMPTOMS
When you are trying to install a program or Windows device driver, the
Setup program for the program or device driver fails.
CAUSE
If the Setup program requires that an AUTOEXEC.BAT or CONFIG.SYS file be
present on your hard disk, it may fail in Windows 95. If these files are
not required due to your computer's configuration, they may not be present.
WORKAROUND
To work around this problem, you can either:
- Create generic AUTOEXEC.BAT and CONFIG.SYS files.
-or-
- Obtain a new Setup program from the manufacturer.
Keywords: KB125448