Stop 7B When Installing Windows NT 3.5 On AST Bravo LC 486/33
Article ID: 125746
Article Last Modified on 10/31/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Server 3.5
This article was previously published under Q125746
SYMPTOMS
When you attempt to install Windows NT version 3.5 on an AST Bravo LC
486/33, the following STOP message appears after Setup completes the mass
storage device detection and reboots the computer (after the third Setup
disk):
STOP: 0x0000007B
INACCESSIBLE_BOOT_DEVICE
CAUSE
This problem can occur when:
- The AST Bravo LC 486/33 computer has a BIOS revision earlier than 2.01.
-or-
- The AST Bravo computer uses an IBM blue lightning processor.
RESOLUTION
If your AST Bravo does not use an IBM blue lightning processor, you can
correct this problem by contacting AST End-User Customer Support at (800)
727-1278 and obtaining the latest BIOS revision for the AST computer (part
number 237874-006).
AST Bravo computers with IBM blue lightning processors are not supported.
Bravo LC 486/33 is manufactured by AST, a vendor independent of Microsoft;
we make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Additional query words: prodnt trap 0x7b 0x07b blue screen disk 9
Keywords: KB125746