Event ID 49: Node ID from Remote Computer was Rejected
Article ID: 126399
Article Last Modified on 12/8/2003
APPLIES TO
- Microsoft SNA Server 2.0
- Microsoft SNA Server 2.1
- Microsoft SNA Server 3.0
- Microsoft SNA Server 2.11 Service Pack 1
- Microsoft SNA Server 3.0 Service Pack 4
- Microsoft SNA Server 4.0
- Microsoft SNA Server 3.0 Service Pack 2
- Microsoft SNA Server 3.0 Service Pack 3
This article was previously published under Q126399
SYMPTOMS
On your SNA Server, an attempted connection is not able to activate and
holds in a pending state. The following events appear in the Application
Event log:
Event ID: 49
Description: Node ID from remote computer was rejected.
Event ID: 55
Description: No incoming connection matched info on XID from remote
MAC address <MAC address>.
From the SNA Server client, when you attempt to connect using a 5250
emulator the following error message appears:
There is a problem with the configuration of the connection to the
AS/400
Primary return code = 0003
Secondary return code = 00000005
CAUSE
One of the three following conditions exist:
- The Network Name in the Connection Properties or the Server properties
does not match the Local Network ID in the Network attributes screen on
the AS/400.
- The Remote Control Point Name in the Connection Properties does not
match the Local Control Point name defined in the AS/400 Network
Attribute Screen.
- The Remote Node ID in the Connection properties is filled in. It
should be blank.
RESOLUTION
Reconfigure to correct the problem.
Additional query words: prodsna
Keywords: kbenv kbnetwork KB126399