Article ID: 127767
Article Last Modified on 11/5/2003
APPLIES TO
- Microsoft Mail Remote 3.2
This article was previously published under Q127767
SUMMARY
When you run version 3.2 of Microsoft Mail Remote for Windows on an IBM
Thinkpad 75x Series equipped with the Mwave modem, the system may appear
to hang when you choose Connect Now from the View menu.
RESOLUTION
NOTE: The workaround below is an unsupported switch.
In the MSMAIL.INI file, under the [SFSREMOTE] section, add the line:
Exclusive=0
The internal default for this setting is 1, giving the Remote client
exclusive control of the Microsoft Windows operating system. Although this
switch will now enable task switching (ALT+TAB), you should not task
switch while connected. If you task switch, you may drop the carrier, or
possibly corrupt the mail message file (.MMF).
Also, there is a modem script available for this modem in the Workgroups
Applications forum.
NOTE: This script is provided by a third party and is not supported by
Microsoft.
STATUS
Microsoft has confirmed this to be a problem in version 3.2 of Microsoft
Mail Remote for Windows.
Keywords: KB127767