Article ID: 127960
Article Last Modified on 10/30/2006
APPLIES TO
- Microsoft Mail Remote 3.2
This article was previously published under Q127960
SYMPTOMS
When you use the Microsoft Mail System Selector, included with version 3.2
of Microsoft Mail Remote for Windows, you may receive the following error:
Mail driver could not be activated because <path>\<file> could not
be found
where <path> is the location of your Windows directory and <file>
could be one of the following files:
MSRMTUI.DLL is usually the file displayed in the error message when you
change from the Microsoft Mail for PC Networks driver to the Windows Remote
driver.
MSSFS.DLL is usually the file displayed when you change from the Mail
Remote driver to the PC Networks driver.
CAUSE
This problem is caused when you start Windows from either a batch file,
NetWare login script, or the command prompt with the command line such as,
where C:\WINDOWS is the path to your Windows directory.
RESOLUTION
NOTE: If you exit and restart Windows, the System Selector may function
properly.
Start Windows with one of the following methods:
- Verify the Windows directory is on the PATH= statement in the
AUTOEXEC.BAT file, and start Windows from the root directory.
- Change to the Windows directory before you launch Windows.
For example,
If Windows (WIN.COM) is started from a NetWare login script or batch file
such as,
then change the entries similar to the following:
STATUS
Microsoft has confirmed this to be a problem in version 3.2 of Microsoft
Mail Remote for Windows. We are researching this problem and will post new
information here in the Microsoft Knowledge Base as it becomes available.
MORE INFORMATION
The file in the error message is usually the first file listed on the
Files= line of the [Transport] section of the FILES.INI file.
If you are using the System Selector to change from the PC Networks driver
to Remote driver, the specific FILES.INI used is the \<Windows Path>
\MSMAIL\MSRMT directory. If you copy the file from the error message to
your Windows directory without re-starting Windows, you will receive a
similar error message when you use the System Selector again. However, the
specific file listed will be the next file on the Files= line.
When you change from the Remote driver to the PC Networks driver, the
specific FILEL.INI used is from the \<Windows Path>\MSMAIL\MSMAIL
subdirectory.
Additional query words: 3.20 novell
Keywords: KB127960