Knowledge Base

BUG: "?" Command with Function "V1" May Not Display Correctly

Article ID: 128588

Article Last Modified on 3/3/2005

APPLIES TO

This article was previously published under Q128588

SYMPTOMS

When you use the "?" command with FUNCTION "V1", the characters "ii" or "il" or "it" are displayed on the same line. Remove the single asterisk from the front of the three commented lines in the code listed in the "Steps to Reproduce Problem" section of this article. This extra code causes the V1 function to work correctly with each font. It appears to work correctly when sent to a defined window instead of the desktop.

STATUS

Microsoft has confirmed this to be a problem in the Microsoft products listed at the beginning of this article. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

MORE INFORMATION

Using the "?" command with FUNCTION "V1" does not display correctly when characters "ii" or "il" or "it" are in the string. The FUNCTION "V1" should display only one character per line.

Steps to Reproduce Problem



Run the following program: 

   CLEAR
				


   *** Commented Code - See Workaround for Explanation***
   *DEFINE WINDOW FontHolder FROM 1,5 TO 30,20
   *ACTIVATE WINDOW FontHolder
				


   =AFONT(myfonts)
   m="iillittabc"
				


   FOR i = 1 TO ALEN(myfonts)

FOR fontsize = 8 TO 11 ?m FUNCTION "V1" FONT myfonts(i),fontsize WAIT WINDOW ; "Font "+ALLTRIM(STR(i))+" of "+ ; ALLTRIM(STR(ALEN(myfonts)))+" - "+ ; myfonts(i)+' Size '+ALLTRIM(STR(fontsize)) TIMEOUT 2 CLEAR ENDFOR 

   ENDFOR
				


   *RELEASE WINDOW FontHolder


NOTE: In certain fonts or sizes, the letters "ii", "ll" and "it" will appear on the same line. Each letter should appear on a separate line.

Additional query words: kbprg kbbuglist FoxWin buglist2.50 buglist2.50a buglist2.50b buglist2.60 buglist2.60a 2.50

Keywords: kbbug kbprogramming KB128588


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.