Cannot Change Video Resolution on HP Vectra Computer
Article ID: 128703
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q128703
SYMPTOMS
When you try to change the video resolution on a Hewlett-Packard (HP)
Vectra computer running Windows 95, you receive the following error
message:
There is a problem with your display settings. The adapter type is
incorrect, or the current settings do not work with your hardware.
CAUSE
HP Vectra computers have on-board VESA local bus video adapters. You must
set the video adapter for the correct display mode using the computer's
BIOS Setup program.
RESOLUTION
Run the HP Vectra's BIOS Setup program and change the display mode to an
appropriate setting for the resolution you want to use.
For information about setting the Vectra's display adapter, please contact
Hewlett-Packard.
Keywords: KB128703