High Resolutions with Diamond Stealth 64 2 MB Video Card
Article ID: 128760
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q128760
SYMPTOMS
When you try to use a video resolution higher than 640 x 480 x 16.7
million (24-bit) colors, you receive the following error message:
Your display adapter is not configured properly. To correct the
problem, click OK to start the Hardware Installation Wizard.
CAUSE
The Windows 95 S3 video driver runs a 32-bit TrueColor mode requiring 4
megabytes (MB) of video RAM. Using the setting "Truecolor=24" in the
[display] section of the SYSTEM.INI file turns on a 24-bit mode that
requires less video RAM.
NOTE: This mode may not work correctly on all video adapters.
RESOLUTION
To use the "Truecolor=24" setting, use any text editor (such as Notepad)
to open the SYSTEM.INI file. Add the line "Truecolor=24" (without
quotation marks) to the [display] section of the file. Save and close the
file, then shut down and restart Windows 95.
Additional query words: diamond stealth pro
Keywords: KB128760