Configuring IBM Token Ring Card to Handle Large Packets

MORE INFORMATION

To configure the IBM Token Ring 16/4 network adapter to use a packet size larger than 2040 bytes, follow these steps:

1. Click the Start button, point to Settings, then click Control Panel.
2. Double-click the Network icon.
3. Click the IBM Token Ring network adapter, then click the Properties button.
4. Click the Advanced tab.
5. Set the Receive Buffer Size setting to 2040, then set the Receive Buffers setting to a value greater than 1.

Although the maximum value you can set for the Receive Buffer Size setting is 2040 bytes, the network adapter has the ability to chain receive buffers together to receive larger packets. Valid values for the Transmit Buffer Size setting range from 256 to 17,952 bytes. Valid values for the Receive Buffer Size setting range from 256 to 2040 bytes.

If you set the Transmit Buffer Size setting to a value larger than 2040 bytes, you must configure the network adapter to receive packets of at least that size to communicate on the network.