Article ID: 130893
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q130893
SUMMARY
When you use PKZIP.EXE with the ampersand (&) switch to span multiple
floppy disks, the following error message appears:
The name specified is not recognized as an internal or
external command, operable program or batch file.
CAUSE
The ampersand switch is not interpreted by the Command Prompt (CMD.EXE)
because it is a reserved command character, used to separate multiple
commands on one line. Therefore, the characters following the ampersand are
interpreted as a bad name.
WORKAROUND
To work around this problem, use the carrot character (^), above the "6"
key, which allows you to input command characters as text. For example, to
compress the C:\DATA directory over multiple floppy disks on the A drive,
you would use the following command:
PKZIP A:\DATA.ZIP C:\DATA\*.* -^&
Alternatively, you can surround the ampersand character with quotes such as
follows:
PKZIP A:\DATA.ZIP C:\DATA\*.* "-&"
PKZIP is manufactured by a vendor independent of Microsoft; we make no
warranty, implied or otherwise, regarding these products' performance or
reliability.
Additional query words: prodnt
Keywords: kb3rdparty kbusage KB130893