HyperTerminal Err Msg: The TAPI Configuration Has Changed...
Article ID: 131612
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q131612
SYMPTOMS
When you start a HyperTerminal connection, you receive the following
error message:
The TAPI configuration has changed and the modem/port selected for
this session is no longer valid.
CAUSE
When you create a connectoid in HyperTerminal, it is associated with a
particular modem on a particular port. If, after you create the connectoid,
the modem is removed, you receive the error message stated above when you
try to use the connection. This error message indicates that the modem
associated with the connectoid has been removed, and that the system has
identified a likely alternative.
RESOLUTION
Click OK to acknowledge the error message. There should be no effect on
the connection if the connection is associated with a valid modem.
Keywords: KB131612