Knowledge Base

PC Win: WGPOMGR.DLL Will Not Work with a Standard Postoffice

Article ID: 132560

Article Last Modified on 10/30/2006

Microsoft Mail for PC Networks 3.0
Microsoft Mail for PC Networks 3.2

This article was previously published under Q132560

SUMMARY

Microsoft Windows for Workgroups versions 3.1 and 3.11 provide a simple, single postoffice for workgroup connectivity. Usually, this postoffice is installed by one user via the Workgroups Mail Windows client. This user can then administer this postoffice via the Microsoft Workgroup Postoffice Manager for Windows dynamic-link library (DLL)--WGPOMGR.DLL.

Once this postoffice has been upgraded to a standard Microsoft Mail for PC Networks version 3.0 or 3.2 postoffice, WGPOMGR.DLL will no longer work against this upgraded postoffice. This article describes, with technical detail, why WGPOMGR.DLL does not work against a standard postoffice.

MORE INFORMATION

When WGPOMGR.DLL initializes, it examines the MASTER.GLB file of the postoffice, the location of which is indicated by the "ServerPath=" statement in the [Microsoft Mail] section of the MSMAIL.INI file on that workstation:

[Microsoft Mail]
ServerPath=M:\

WGPOMGR.DLL then checks the MASTER.GLB file to see if it is of type "single postoffice." If the postoffice is a single postoffice, the .DLL file then checks to ensure the proper template files exist.

If the proper template files exist, WGPOMGR.DLL locks open the FLAG.GLB file and allows the user (with proper access rights) to administer the WGPO postoffice.

NOTES:

A standard Microsoft Mail for PC Networks postoffice will be an "internetwork" type postoffice in the MASTER.GLB file. This postoffice type, in the MASTER.GLB, allows message transfer agents to transfer mail to and from the postoffice.

WGPO postoffices all have the same serial number: 0799-99992. Standard postoffices each have an individual serial number.

The procedure to remove the WGPOMGR.DLL entries from the Windows Client for an upgraded postoffice are outlined in the following article in the Microsoft Knowledge Base:
91042 PC WFW: Postoffice Administration Not Available from Windows
The WGPO postoffice always contains an ADMIN.TPL and ADMIN.INF file set. These files hold additional user information. Standard postoffices need not necessarily contain ADMIN.TPL and ADMIN.INF files; however, they may have these files if they are defined by the administrator.

Additional query words: 3.20

Keywords: KB132560