Duplicate SCSI Device Entries Appear in Device Manager
Article ID: 132770
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q132770
SYMPTOMS
Duplicate SCSI device entries appear in Device Manager, and many
unexplained drive letters appear in Windows Explorer or My Computer.
CAUSE
A SCSI device is installed that has the same device ID of 2, 7, or 15 as
another SCSI device detected on the computer.
Duplicate SCSI device entries appear in Device Manager when a SCSI device
with an ID of 7 or 15 is put on the same SCSI ID as the SCSI controller.
SCSI controllers are typically on SCSI ID 7 or ID 15 (on a wide SCSI
interface).
If a SCSI device detects another device on ID 2, it usually means that
two SCSI controllers are using the same chain on ID 2.
RESOLUTION
If a SCSI device conflicts with another SCSI device on ID 7 or ID 15
(on a wide SCSI interface), change the SCSI ID of the duplicated SCSI
device to an unused ID, such as 3, 4, 5, or 6.
If two SCSI controllers conflict with each other on ID 2, break the
chain. For example, make sure the internal cable goes only to the internal
device (or devices), not to a PCI card.
Additional query words: scsi
Keywords: KB132770