Knowledge Base

Error Message Attempting to Add Users in Network Dialog Box.

Article ID: 132808

Article Last Modified on 11/15/2006

APPLIES TO

This article was previously published under Q132808

SYMPTOMS

If you have user-level access control enabled in Windows 95 and click OK in the File And Print Sharing dialog box or Add on the Remote Administration tab in the Passwords Properties dialog box, you may receive the following error message:
You cannot view the list of users at this time. Please try again later.

CAUSE

The list of users may not be available if the authenticating server is not active on the network or cannot be found because of network configuration problems.

RESOLUTION

Verify that user-level access control is configured correctly. To do so, follow these steps:
  1. In Control Panel, double-click Network.
  2. Click the Access Control tab.
  3. In the "Obtain list of users and groups from" box, note the name that is specified. This should be the name of your network domain.

Keywords: kberrmsg kbnetwork KB132808


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.