Upgrading Windows NT 3.1 to Windows NT 3.51 on Compaq Computers
Article ID: 133030
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.1
- Microsoft Windows NT Advanced Server 3.1
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q133030
If you are not using the Compaq SmartStart CD, use the following procedure
to upgrade your Compaq computer from Windows NT 3.1 to Windows NT 3.51:
- Apply Windows NT 3.1 Service Pack 3 and Compaq Support Software
Diskette (SSD) 1.05b.
- Upgrade to Windows NT 3.5 and apply Compaq SSD 1.15.
- Upgrade to Windows NT 3.51
- Re-apply Compaq Software Support Software Diskette SSD 1.15 or later to
ensure you are running on the most current drivers.
NOTE: The SmartStart CD includes additional Compaq management files,
management services and specific Hardware Abstraction Layer (HAL)
files for Compaq computers.
NOTE: If you have problems with this upgrade on a computer running the
TCP/IP network protocol, unintstalling TCP/IP before upgrading and then
reinstalling it afterwards may help.
Additional query words: prodnt 3.10 smart start
Keywords: KB133030