KB134559 - Roland RAP-10 Sound Card Not Detected by Setup

Article ID: 134559

Article Last Modified on 1/19/2007

Microsoft Windows 95
Microsoft Windows 98 Standard Edition

This article was previously published under Q134559

If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:

http://support.microsoft.com/default.aspx/w98?sid=460

SYMPTOMS

Windows Setup does not detect a Roland RAP-10 sound card configured for base I/O address 330h.

CAUSE

The RAP-10 sound card has additional features not supported by the standard Windows drivers. Additionally, its I/O resource range extends beyond the standard MPU-401 detection range of base addresses.

Windows does not normally upgrade this device and leaves the Windows 3.1 drivers in place. However, when you install Windows on a clean system the RAP-10 is detected as an MPU-401, except when configured for I/O base address 330h.

RESOLUTION

Use the Add New Hardware tool in Control Panel to manually install the device, or change the device's base address and then run the Add New Hardware Wizard to detect and install the device.

Keywords: kbhardware kbprb kbsound KB134559