Thomas Conrad Token Ring cards TC-4045 and TC 4145 Setup Problem
Article ID: 134761
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q134761
SYMPTOMS
When you install Windows NT 3.51 on your non-PCI bus computer that has a TC-
4045 or TC-4145 network card installed, one or more of the following
symptoms occur:
- Your computer hangs during Windows NT Setup.
- A message appears after Setup that the network could not start.
- The System Log contains the following event after Setup:
5004: TC4045 could not connect to interrupt number supplied.
- Your floppy drive does not work.
CAUSE
The OEMSETUP.INF file assumes that your TC-4045 or TC-4145 network card is
installed a PCI bus, however, it should ask you to specify what type of bus
(ISA, EISA, PCI, MCA) the card is installed in.
RESOLUTION
Thomas Conrad has a new OEMSETUP.INF file. To obtain this file, download
the self-extracting NT351OEM.EXE file from the Thomas Conrad BBS, WEB
server, or the CompuServe Thomas Conrad forum. For more information contact
Thomas Conrad at:
- BBS phone number: (512) 433-6156
- WEB site address: WWW.TCI.COM
- CompuServe forum: GO TCCForum
Additional query words: prodnt
Keywords: kb3rdparty kbsetup KB134761