Knowledge Base

Network Monitor Hangs Windows for Workgroups 3.11

Article ID: 134961

Article Last Modified on 10/27/2006

APPLIES TO

This article was previously published under Q134961

SYMPTOMS

When you start a capture in Network Monitor on computer running Windows for Workgroups that has a Compaq Netflex2 Token Ring card installed, the system stops responding (hangs) if Microsoft TCP/IP-32 is one of your installed protocols. If NetBEUI or NWBlink are installed without Microsoft TCP/IP-32, starting a capture may work once, but if you stop and start the capture a second time, an error message appears stating that the network driver does not support promiscuous mode.

WORKAROUND

Use another Token Ring card supported by Network Monitor.

STATUS

Microsoft has confirmed this to be a problem in Systems Management Server version 1.0. We are researching this problem and will post new information here in the Microsoft Knowledge Base as is becomes available.

Additional query words: netmon prodsms sms network interface NIC nw blink

Keywords: kbnetwork kbnetworkmon KB134961


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.