Packard Bell Legend Hard Disk Using MS-DOS Compatibility Mode
Article ID: 135024
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q135024
SYMPTOMS
Large IDE hard disks (hard disks with more than 1024 cylinders) in Packard
Bell Legend computers may use MS-DOS compatibility mode.
CAUSE
This situation may occur because of a drive geometry translation error in
the Phoenix BIOS that prevents the protected-mode IDE device driver from
being used.
RESOLUTION
Contact Packard Bell for information about obtaining an updated BIOS
to correct this problem.
MORE INFORMATION
This problem occurs only when a Packard Bell Legend computer with a large
IDE hard disk contains a Phoenix BIOS version A486 1.01.E Ref ID # 07.
Packard Bell Legend computers do not come from the manufacturer with large
IDE hard disks.
Keywords: KB135024