How to Setup IBM CA/400 to Work Over the SNA 2.11 Win 3.x Client

MORE INFORMATION

To install CA400, follow these steps:

1. Install the SNA Server Windows 3.x client software by running the Setup program located in the \clients\win3x directory on the SNA Server 2.11 or 3.0 CD-ROM.
2. Using Notepad or another text editor, edit the [WNAP] section of the WIN.INI file so that the following values are modified as shown:

         CA400=YES
         CA400SharedFolders=YES

3. In the [SNAServerEHNAPPC] section, add the following entry:

   LocalLU=<localLU>

   The Local APPC LU alias can be found in SNA Server Admin. configured off the SNA Server service. This Local LU must be partnered with a Remote APPC LU associated with your AS/400 that is running OS/400 V3R1 or later.
   
   The <localLU> parameter needs to be in all capital letters or several errors may occur.
4. Install the IBM Client Access/400 shared folders feature from the installation disks by running the INSTALL.EXE program.
5. After CA400 is installed, a dialog box appears telling you to restart Windows. Do NOT click OK! Instead, go to the \CAWIN directory and rename the following files:

   rename EHNAPPC.DLL EHNAPPC.IBM
   rename EHNRTRW.DLL EHNRTRW.IBM

6. Return to the CA/400 dialog box and choose OK to allow CA/400 to restart Windows.
7. After restarting Windows, CA400's setup will continue. In the dialog box that appears, select the "Connect Type" as None. Choose OK. If installing v3.r1.m1 of CA/400, select "Other Router". You will then be prompted for a server name. Specify the Remote LU Name you assigned in SNA Server configuration.
8. After selecting OK, CA400 Setup will inform you that you need to restart Windows again because the configuration has changed. Do it.
9. After restarting, go into the CA400 folder and run the SETUP icon. You should see the SNA Server Windows 3.x client icon (WNAP.EXE) start up automatically. At this point, CA400 will attempt to log you into ANY AS400's you have configured thru SNA Server Admin. If the dialog box that comes up is pointing to an AS400 that is NOT running OSV3R1 (or better), press cancel. Do this until the dialog presents an AS400 that is running OSV3R1. At this point, enter the common user ID/Password for that system.
10. With Client Access Setup open on your screen, select the icon for the Rumba/400 install. When you select this option, CA400 will install Rumba/400 from the AS400 to your client.

The following information is for reference purposes only. It shows the changes that may be made to system files. This may vary depending on what options you have chosen on your client.

PCS.INI
=======
[PCS/400]
INITCFG=NO
GROUP=INS
RUMBA=INS

[Shared Folders]
SFLR01=1,I

[UPDT]
UPDT01=I:\QPWXCWN,C:\CAWIN,S,,,Client Access/400
UPDT02=I:\QPWXCRB\,C:\RUMBACAW,S,,,RUMBA/400

[NETWORK]
I:=0

[ADVANCED]
ExtraFunction=No

NSD.INI
=======
[Configuration]
LANGUAGE=2924
DIRECTORY=C:\CAWIN
COMMONUSERID=
LOCALLUNAME=
DLCTYPE=NonNSWin
RTDN=

[MODES]
QPCSUPP=*, 2, 32, 16
QSERVER=*, 2, 32, 16
SNASVCMG=256, 1, 2, 1
BLANK=,2, 8, 4
#BATCH=256, 3, 8, 4
#INTER=, 7, 8, 4

WIN.INI
=======
[SnaServerEHNAPPC]
LocalLu=DONALD
DILBERT=SNA

[Wnap]
WBinPath=C:\SNA.WIN
Remote=DISNEYWORLD
LocalFlag=LOCAL
NosType=LANMAN
NosSetup=WFW
NetSetup=NO
CA400=YES
CA400SharedFolders=YES

[CAWIN]
EHNP=C:\CAWIN
EHNL=2924

[CAMAPI]
HLL=C:\RUMBACAW\EEHLLAPI.DLL

SYSTEM.INI
==========
[386Enh]
device=C:\CAWIN\VREFLECT.386
device=C:\CAWIN\VNSWUTIL.386
device=C:\CAWIN\VNCD.386

AUTOEXEC.BAT
============
Autoexec.bat
C:\DOS\SMARTDRV.EXE /L /X 2048 128
LH /L:1,40688 C:\DOS\MSCDEX.EXE /S /d:aspicd0 /m:12
@ECHO OFF
PROMPT $P$G
path c:\wfw311;c:\dos;C:\SNA.WIN;C:\RUMBACAW;c:\CAWIN;
SET TEMP=C:\TEMP
C:\WFW311\net start