WD: PCL Escape Codes to Use with the PRINT Field

MORE INFORMATION

Note: Not all of these commands are supported on all HP printers, nor are they guaranteed to work exactly as described on non-HP printers. Check your printer's manual or technical support line to be sure.

For further information on HPCL escape sequences, refer to your HP printer's user's manual or the "Hewlett-Packard PCL 5 Printer Language Technical Reference Manual," available from Hewlett Packard.

Printer
Command     Function             # refers to
--------------------------------------------
27"E"       Printer Reset

27"&l#X"    Number of copies     1 to 32,767

27"&l#G"    Output bin           1 = upper bin
                                 2 = lower bin
27"&l1T"    Job separation

27"&l#S"    Selects single or    0 = single-sided
            duplex (two-sided)   1 = duplex, long-edge binding
            printing and choice  2 = duplex, short-edge binding
            of binding

27"&l#H"    Paper source         0 = current source
                                 1 = upper tray
                                 2 = manual feed - paper
                                 3 = manual feed -  envelope
                                 4 = lower tray or mp tray
                                 5 = envelope feeder or optional 500-
                                     sheet cassette (HP 4/4M)
                                 6 = envelope feeder (HP 4/4M)

27"&l#A"    Paper Size           1 = executive
                                 2 = letter
                                 3 = legal
                                 26 = A4

            Envelope Size        100 = Commercial B5
                                 80 = Monarch
                                 81 = Commercial 10
                                 90 = DL
                                 91 = International C5

27"&l#O"    Orientation          0 = portrait
                                 1 = landscape
                                 2 = reverse portrait
                                 3 = reverse landscape

27"&l#G"    Output Destination   1 = Upper tray
                                 2 = Rear tray

27"*t#R"    Resolution           75   =  75 dpi
                                 300  =  300 dpi
                                 600  =  600 dpi (on supported printers)

KEY
---

27             The Escape character; just type 27.
"              Opening or closing quotation marks for the command string
               (must be "straight" quotes, not "smart" or "curly" quotes).
&              Ampersand.
l              Lowercase letter "L".
#              Option specifier, a number.
E, X, G, etc.  Printer command specifier.
				

NOTES:

• If you are using version 3.31.89 of the HP IIIx driver, insert these command sequences at the beginning of the page where you want the new setting to take effect. For versions of the HP III driver later than 3.31.89, if header or footer text exists in the document (including page numbers), you must insert the printer control sequence in the header on a line by itself, terminated with a hard-carriage return. You can format this line for 1 point to minimize its effect on the formatting of header text, if necessary.
• The Resolution setting of 600 dpi using a 300 dpi driver with a 600-dpi printer will make the resulting printout half the normal size.