"Invalid Destination Folder" Error Performing Admin Install

Q136091


The information in this article applies to:


SYMPTOMS

When you run an administrative installation (Setup /a) of one of the programs listed at the beginning of this article, you may receive the following error message when you change the destination folder for the program

The specified folder:

'<path>'

is invalid, incomplete, too long, or write-protected. Enter a full path with the drive letter; for example 'C:\APPS'.
where <path> is the location on the server in which you are installing the program.


CAUSE

This error message appears when you change the destination for the administrative installation to one of the following:

For example, this error message appears if you enter the following destination for an administrative installation:
\\server\share\Msoffice

-or-

f:\Office 95
When you perform an administrative installation, you must install the program to a path using a drive letter (such as f:) and you must use 8.3 folder names.


RESOLUTION

To avoid receiving this error message when you perform an administrative installation, enter a destination that uses a drive letter and 8.3 folder names. The following examples are valid destinations for an administrative installation:

f:\Msoffice

-or-

f:\Word95

Additional query words: 2.00 3.00 8.00 OFF7 xl7 95 97 off97

Keywords :
Issue type :
Technology : kbWordSearch kbWordWSearch kbAccessSearch


Last Reviewed: November 21, 2000
© 2001 Microsoft Corporation. All rights reserved. Terms of Use.