Works 95 Communications Error: There Was a Problem Sending Text
Article ID: 137164
Article Last Modified on 11/15/2004
APPLIES TO
- Microsoft Works 4.5 Standard Edition
- Microsoft Works 4.5a
- Microsoft Works 4.0 Standard Edition
- Microsoft Works 4.0a
This article was previously published under Q137164
SYMPTOMS
When you try to send text in the Communications module of Works 4.0, 4.0a, 4.5, or 4.5a, you may receive the following error message:
There was a problem sending text.
This occurs when the Line Delay setting is greater than 30 seconds.
RESOLUTION
Set the
Line Delay to less than 30 seconds. To adjust your
Line Delay setting, do the following:
- On the Settings menu, click Transfer.
- In the Text Transfers section, enter a value in tenths of a
second. For example, 20 seconds is entered as 200.
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article.
Additional query words: 4.00 4.00a 4.50 4.50a w_works communications text send delay
Keywords: kberrmsg kbprb KB137164