KB137726 - Cannot Connect to LPT4 with Client for NetWare Networks

Article ID: 137726

Article Last Modified on 1/19/2007

Microsoft Windows 95
Microsoft Windows 98 Standard Edition

This article was previously published under Q137726

If this article does not describe your hardware-related issue, please see the following Microsoft Web site to view more articles about hardware:

http://support.microsoft.com/default.aspx/w98?sid=460

SYMPTOMS

When you are using the Microsoft Client for NetWare Networks, you may receive the following error message when you try to capture the LPT4 port in the properties for your printer:

The following error occurred while trying to connect LPT4: to \\<server>\<printer>

Device name is out of range allowed.

CAUSE

The Microsoft Client for NetWare Networks is limited to three NetWare printer redirections. This same limitation exists with the Novell NETX client, but does not exist with the Novell VLM client.

RESOLUTION

To work around this problem, use one of the following methods:

Connect to the NetWare printer by specifying a Universal Naming Convention (UNC) path to the printer, rather than capturing the LPT4 port.

NOTE: This workaround prevents MS-DOS-based programs from printing to the network printer. MS-DOS-based programs require that you capture a printer port.
Use the Novell VLM client instead of the Microsoft Client for NetWare Networks.

MORE INFORMATION

For additional information about printer redirection with the Novell NETX and VLM clients and Windows and Windows for Workgroups versions 3.x, please see the following article in the Microsoft Knowledge Base:

119070 Using More Than Three Printer Ports with Novell 4.x & Windows

Additional query words: HWPORTS 95

Keywords: kb3rdpartynetclient KB137726