No NDIS Interrupt Activity Using Windows 95 and Pathworks
Article ID: 138155
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q138155
SYMPTOMS
If you upgrade a computer that is connected to a DEC Pathworks 4.1 network
and contains a DEC Etherworks 3 Turbo (205) network adapter from Windows
for Workgroups 3.11 to Windows 95, you may receive the following error
message when you start the computer:
No NDIS interrupt activity. Maybe NI_IRQ is set wrong or cable is
not attached or /DLL broken
CAUSE
The error message occurs when the following line is processed from the
Startnet.bat file:
c:\decnet\schk.exe /h
RESOLUTION
Change the line stated above in the Startnet.bat file to read:
c:\decnet\schk.exe /n
After you make this change, restart your computer.
The /N switch specifies that the Ethernet vector not be checked for
interrupt activity during loading.
Additional query words: digital
Keywords: KB138155