Accessibility High Contrast Setting Reverts to Custom
Article ID: 138228
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q138228
SYMPTOMS
If you choose the Black On White option in the Settings For High Contrast
dialog box in Accessibility properties, close the dialog box, and then
open it again, the Black On White option is changed to Custom. If you then
click OK or Apply, the custom scheme is not applied and there is no change
in the high contrast color scheme.
RESOLUTION
To use the Custom option, you must use a different scheme.
STATUS
Microsoft is researching this problem and will post new information here
in the Microsoft Knowledge Base as it becomes available.
Keywords: kbenable kbenablelearn kbenablesight KB138228