4mm DAT Tape Drives Fail on PCI Controller
Article ID: 138568
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q138568
SYMPTOMS
When you use PCI SCSI controllers, some 4mm DAT tape drives may not work
correctly with the Windows NT 4mm DAT driver.
RESOLUTION
To work around this problem:
- Install the tape drive on a ISA SCSI controller. You can set correct
IRQ jumper settings or configure the correct settings using the software
provided with the ISA SCSI controller.
-or-
- On Intel (x86) based computers, the BIOS has an option to configure a
specific PCI slot to a user defined IRQ. This is implementation
specific and may not be available on all PCI computers.
Additional query words: prodnt backup
Keywords: kbother KB138568