Sony ATAPI CD-ROM Drive Must Be Master Drive on IDE Adapters
Article ID: 139101
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
This article was previously published under Q139101
SUMMARY
When you use a Sony ATAPI CD-ROM drive on a standard IDE adapter, you may
have to configure the Sony drive as the master drive.
MORE INFORMATION
Sony has found that there can be timing problems if a SONY ATAPI CD-ROM
drive is connected to a standard inexpensive IDE adapter with many hard
drives. They suggest configuring all models of SONY ATAPI drives connected
to standard IDE adapters as master drives, which avoids the timing issues.
EIDE adapters do not have the same timing issues, so the SONY ATAPI CD-ROM
can be used as Master or Slave with those adapters.
For more information contact Sony technical support at (408) 894-0555.
The products discussed here are manufactured by vendors independent of
Microsoft; we make no warranty, implied or otherwise, regarding these
products' performance or reliability.
Additional query words: prodnt ntsetup
Keywords: KB139101