KB140385 - Error Using Uplodprf on NTFS Volumes

Article ID: 140385

Article Last Modified on 11/1/2006

Microsoft Windows NT Workstation 3.51
Microsoft Windows NT Server 3.51
MSPRESS Microsoft Windows NT Resource Kit 3.51

This article was previously published under Q140385

SYMPTOMS

When you use UPLODPRF (cps) with the -a switch to upload the entire volume, the error message, "(32) File is in use by another process" appears. The UPLODPRF utility stops processing and exits to the command prompt.

CAUSE

UPLODPRF is stopping on the pagefile. This only happens on NTFS volumes and when using the -a switch is used. If you use the /dir option, processing starts, but errors out trying to set attributes on the pagefile.

WORKAROUND

There are three workarounds to this problem. They are as follows:

Move the pagefile to a different partition than the one being profiled.

Use the FAT file system on the Master system and convert to NTFS on the target system during the Winntp portion of CPS. For additional information, please see the following article(s) in the Microsoft Knowledge Base:

ARTICLE-ID: 136636
TITLE : Converting to NTFS
The uplodprf command also has a switch, \dir. This switch will allow for a specific directory(s) to be uploaded to the distribution server, in addition to the \systemroot.

Example command line syntax:

uplodprf /s:w:\ /i:profile.ini \users \win32app

STATUS

Microsoft has confirmed this to be a problem in Windows NT Resource Kit 3.51. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

Additional query words: prodnt filesystem cps setup unattended automate

Keywords: kbnetwork kbsetup KB140385