MS Backup Err Msg: Errors Occurred During This Operation...
Article ID: 140790
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q140790
SYMPTOMS
When you use Microsoft Backup to format a QIC-80 2120XL (extended length)
tape on a Connor Tape Stor 250 tape drive that is controlled by the floppy
disk drive controller, you may receive the following error message:
Errors occurred during this operation. Do you want to view them now?
The error log reports the following information:
Error/Warnings during operation:
1173(11056,2) - \\ Unknown error.
1320(13408,3) - \\ Warning: This operation has been canceled by the system.
Total number of errors encountered: 2
CAUSE
This error can occur if you try to format a 2120XL tape on an older Connor
Tape Stor 250 tape drive. Older drives can be identified by the presence of
an eject button.
RESOLUTION
Connor currently has no solution for this problem. Connor advises customers
to purchase preformatted XL tapes for these older drives. Connor's newer
drives (without the eject button) do not experience this problem.
Keywords: kbprb KB140790