Knowledge Base

Windows NT Setup Fails on an IBM ThinkPad 760C P120

Article ID: 141735

Article Last Modified on 11/1/2006

Microsoft Windows NT Workstation 3.5
Microsoft Windows NT Workstation 3.51
Microsoft Windows NT Server 3.5
Microsoft Windows NT Server 3.51

This article was previously published under Q141735

SYMPTOMS

When you attempt to install Windows NT version 3.51 on a P120 MHz IBM ThinkPad 760C, a STOP Message (blue screen) appears when Setup reboots. Specifically, this happens during the initial blue screen (with the progress dots) as drivers are loaded. The STOP Message information varies, but is consistently at the same place in the boot process.

CAUSE

The IBM ThinkPad 760C P120 model is only supported by Windows NT if used with BIOS revision 91G228.

RESOLUTION

BIOS revision 91G228 is a BETA version. It is currently available from the IBM bulletin board, in directory 37, at (919) 517-0001. The self-extracting filename is SYTPF100.EXE. Currently, this is the only version of BIOS on the P120 models that works with Windows NT.

Additional query words: prodnt

Keywords: KB141735