Knowledge Base

DNS Address from RAS Server Not Passed to RAS Client

Article ID: 142303

Article Last Modified on 10/31/2006

APPLIES TO

This article was previously published under Q142303

SYMPTOMS

Your Windows NT RAS client is configured for a server assigned IP address, but does not get a Domain Name Service (DNS) server address from the Windows NT RAS server.

The RAS server is configured to use DHCP to assign remote TCP/IP client addresses. The DHCP server is configured to give out DNS server addresses. The RAS server itself has a DNS address configured, but this address is not being passed along to the RAS clients.

CAUSE

Currently, a Windows NT RAS server that has obtained a DNS server address through DHCP will not pass this address on to its RAS clients.

RESOLUTION

To work around this issue with Windows NT version 3.51, you must manually configure the RAS server with a DNS server address using the following steps:
  1. From Control Panel double-click Network.
  2. Click TCP/IP Protocol, click Configure, and click DNS.
  3. Enter the DNS server address and click Close.
  4. Restart the RAS Server when prompted.
To resolve this issue with Windows NT version 4.0, obtain the latest Service Pack.

STATUS

Microsoft has confirmed this to be a problem in Windows NT versions 3.51 and 4.0. This problem was corrected in the latest Windows NT 4.0 U.S. Service Pack. For information on obtaining the Service Pack, query on the following word in the Microsoft Knowledge Base (without the spaces):

S E R V P A C K




Additional query words: 3.10 3.50 2.20 3.11 4.00

Keywords: KB142303


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.