Knowledge Base

How to Redirect Print Jobs If Print Device Is Not Available

Article ID: 142310

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q142310

SUMMARY

If a print device is temporarily out of service or it is not available for an extended period of time, print jobs that are submitted to the printer are on hold. Windows NT does not include a feature that automatically redirects print jobs to another printer of the same type. This article explains how you can redirect print jobs to another printer.

MORE INFORMATION

To redirect print jobs of a specific printer, do one of the following:
  • If Windows NT recognizes either a local or network printer, change the Print To entry in Print Manager to the new printer.

    -or-
  • If Windows NT does not recognize a network printer, but you do know the share name of the network printer, type the following at the MS-DOS command prompt:

    net use LPTx: \\<Computer name>\<Printer name>

    In Print Manager, change the Print To entry to the redirected port LPTx (where x is the printer port number).

Additional query words: prodnt

Keywords: KB142310


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.