Error 3095 and 3096 with Intel EtherExpress MCA & MCA/TP

RESOLUTION

Intel has released a new .adf file. The previous version of the .adf file combined BNC and RJ45 in a single entry (BNC/RJ45). The new .adf file enables you to select TP(RJ45) or BNC separately. You can download E16adf.exe from:

Steps to set up the .adf file:

1. Extract the file E16adf.exe and copy the @628b.adfa disk or the backup PS/2 reference disk.
2. Turn off the computer and remove the Intel EtherExpress MCA or MCA/TP card.
3. Turn on the computer so that the system detects the removal of the card and reconfigures itself.
4. Turn off the computer again, replace the EtherExpress MCA or MCA/TP card back and turn the computer on.
5. The system detects the new card. A message appears saying the system does not recognize the adapter card. Put the reference disk in when you are prompted to do so.
6. If the new @628b.adf file was not added in the reference disk, select 'option diskette' and insert the disk created.
7. Select TP (RJ45).
8. Restart Windows NT.

To check whether the changes have taken place, look at the "L" light on the adapter. If you have loaded the network card driver in Windows NT and the light is on, you have a link to the network.

The third-party contact information in this article is provided to help you find the technical support you need. This contact information is subject to change without notice. Microsoft in no way guarantees the accuracy of this third-party contact information.