NetBT Fails to Bind to a Large Number of IP Addresses
Article ID: 142880
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Server 3.51
This article was previously published under Q142880
SYMPTOMS
When a computer running Windows NT is configured with a large number of IP
addresses through the registry, NetBT may fail to bind. The following
event log error may be generated:
Initialization failed because the driver device could not be created.
CAUSE
Only five IP addresses can be configured per network interface using the
TCP/IP configuration screens. However, more may be added using the
registry editor. When a large number of IP addresses is assigned to a
single Network Interface card, NetBT may fail to bind. Reports on the
number of addresses attainable without failure vary from 16 to about 24.
STATUS
Microsoft has confirmed this to be a problem in Windows NT version 3.51.
This problem was corrected in the latest Windows NT 3.51 U.S. Service
Pack. For information on obtaining the Service Pack, query on the
following word in the Microsoft Knowledge Base (without the spaces):
Additional query words: multi homed ISP gibralter Gibraltar IIS internet server multiple addresses more NIC adding multihomed
Keywords: kbnetwork KB142880