Knowledge Base

Unattended Installation of IBM Auto 16/4 Token Ring Adapter

Article ID: 142904

Article Last Modified on 11/1/2006

APPLIES TO

This article was previously published under Q142904

SUMMARY

This article describes how you can perform an unattended installation of the IBM Auto 16/4 token ring adapter in Windows NT.

MORE INFORMATION

NOTE: Before you start the unattended installation of the token ring adapter, please see the following article in the Microsoft Knowledge Base regarding the OEMSETUP.INF file for IBMTOK4.SYS:

ARTICLE-ID: 137505
TITLE : IBM 16/4 Auto Token Ring Adapter Driver Causes Event ID 7000


To perform an unattended installation of the IBM Auto 16/4 token ring adapter, close all applications and do the following:
  1. Create a directory on your hard disk drive. For example: c:\ibmtok4
  2. Copy all the files in the I386 directory of the Windows NT 3.51 compact disc to c:\ibmtok4:
  3. Copy IBMTOK4.SYS from the \drvlib\netcard\x86\ibmtok4 directory on the Windows NT compact disc to c:\ibmtok4.
  4. Expand the following files in c:\ibmtok4 by typing the following:

    expand oemnadtk.in_ oemnadtk.inf

    expand ntlanman.in_ ntlanman.inf
  5. Make a copy of DOSNET.INF by typing the following in c:\ibmtok4:

    copy dosnet.inf dosnet.bak
  6. Rename the *.IN_ files in c:\ibmtok4 to *.BAK by typing the following:

    ren oemnadtk.in_ oemnadtk.bak

    ren ntlanman.in_ ntlanman.bak
  7. Change a few lines in OEMNADTK.INF to read as follows:

    ProductSoftwareName = "IbmTok4"
    ProductSoftwareImagePath = "\SystemRoot\System32\drivers\ibmtok4.sys"
    ProductHardwareName = "IbmTok4"

    [Files-IBMTok]
    19,IBMTOK4.SYS , SIZE=25600

    [OptionsTextENG]
    IBMTOK = "IBM Auto 16/4 Token-Ring Adapter"
    FunctionTitle = "IBM Auto 16/4 Token-Ring Adapter Card Setup"
    ProductSoftwareDescription = "IBM Auto 16/4 Token-Ring Adapter Driver"
    ProductHardwareDescription = "IBM Auto 16/4 Token-Ring Adapter"
    ProductSoftwareTitle = "IBM Auto 16/4 Token-Ring Adapter Driver"
    ProductHardwareTitle = "IBM Auto 16/4 Token-Ring Adapter"
  8. In DOSNET.INF, change:

    d1,ibmtok.sys

    to

    d1,ibmtok4.sys
  9. Change a line in NTLANMAN.INF to read as follows:

    set AdapterSrcDir = $(!OEMNetDrive) - use to read $(OEMNetDrive)
  10. Create an answer file (for example: IBMTOK.TXT) in c:\ibmtok4. You may create the answer file using the Setup Manager included in the Windows NT Resource Kit version 3.51. The following is a recommended content of IBMTOK.TXT:

    [Unattended]
    Method = express
    ConfirmHardware = no
    NtUpgrade = no
    Win31Upgrade = no
    TargetPath = \WINNT35

    [GuiUnattended]
    !DetachedProgram = ""
    !Arguments = ""
    !SetupNetwork = "YES"
    !SetupApplications = "NO"
    !TimeZone = "(GMT-06:00) Central Time (US & Canada)"

    [UserData]
    !FullName = "Name"
    !OrgName = "Company"
    !ComputerName = "IBMTOK4"
    !ProductId = "xxxxxxxx-xxx"

    ;The NetworkAdapterData and AdapterParameters section for the ;configuration of the IBM Auto 16/4 Token Ring Adaper.

    [NetworkAdapterData]
    !AutoNetOption = "IBMTOK"

    [AdapterParameters]
    IoBaseAddress = 1
    MediaType = 2
    NetworkAddress = ""

    [TransportData]
    !InstallNWLink = 1
    !AUTONETIPXFRAMETYPE = 255
    !InstallTCPIP = 0
    !InstallNetBEUI = 1

    [DomainData]
    !AutoWorkGroup = "WORKGROUP"
  11. To start the unattended installation of the IBM Auto 16/4 token ring adapter, type the following at the command prompt (make sure you are in c:\ibmtok4):

    winnt /s:x:\ /t:c: /u:x:\ibmtok.txt /b

Additional query words: prodnt

Keywords: KB142904


Send feedback to Microsoft

© Microsoft Corporation. All rights reserved.