NetFlex-2 ENET-TR With Compaq SSD Not Routing to DECNet Node
Article ID: 143150
Article Last Modified on 11/1/2006
APPLIES TO
- Microsoft Windows NT Workstation 3.5
- Microsoft Windows NT Workstation 3.51
- Microsoft Windows NT Workstation 4.0 Developer Edition
- Microsoft Windows NT Server 3.5
- Microsoft Windows NT Server 3.51
- Microsoft Windows NT Server 4.0 Standard Edition
This article was previously published under Q143150
SYMPTOMS
A Windows NT client computer using a NetFlex-2 ENET-TR network adapter and
the network adapter driver in Compaq SSD 1.15 (and greater) is not able to
connect to a remote DECNet node across a router. The Windows NT client
computer is running DEC Pathworks.
RESOLUTION
To work around this problem:
- Note the network configuration of your DEC Pathworks network software.
To do this, select DEC Pathworks and click Configure in Control Panel
Network.
- Remove DEC Pathworks from the Installed Network Software list in Control
Panel Network.
- Replace the following NetFlex driver files with the files in Compaq SSD
1.14:
%SystemRoot%\system32\netflx.dll
%SystemRoot%\system32\drivers\netflx.bin
%SystemRoot%\system32\drivers\netflx.sys
- Shut down and restart Windows NT.
- Reinstall the DEC Pathworks network software in Control Panel Network.
For more information, contact Compaq Technical Support at (800) 652-6672.
The Compaq products discussed here are manufactured by Compaq Computer
Corp., a vendor independent of Microsoft; we make no warranty, implied
or otherwise, regarding these products' performance or reliability.
Keywords: kb3rdparty KB143150