Cannot Undock with PCMCIA Card in Databook PCMCIA Controller
Article ID: 145765
Article Last Modified on 11/15/2006
APPLIES TO
This article was previously published under Q145765
SYMPTOMS
When you try to undock a laptop computer with a PCMCIA card installed in
a Databook PCMCIA controller socket, you may receive the following error
message:
The computer failed to undock
RESOLUTION
To work around this problem, remove all PCMCIA devices from their sockets
before undocking the computer. After doing so, the Eject command on the
Start menu works correctly.
STATUS
Microsoft is researching this problem and will post new information here
in the Microsoft Knowledge Base as it becomes available.
Keywords: KB145765